OA Collaborative Office|Enterprise Mailbox|中文Welcome to Toly Electric Official Website!
0086-510-85226928
Product

Products

Flat Enamelled wire
Flat Enamelled wire
Flat Enamelled wire
Flat Enamelled wire
Flat Enamelled wire

Flat Enamelled wire

Specification range:
Thickness 0.80~5.60 mm
Width 2.00~18.00 mm
Range of coating thickness: 0.08~0.20 mm
Range of breakdown voltage: 3000V~5000V

Category:PRODUCTS
Product Description

● Product Introduction

Flat enameled has the characteristics of thin insulation layer, high insulation strength, good flexibility, smooth surface and so on. It is widely used in distribution transformers, various generators, motor windings and various electrical equipment.
In order to improve the corona resistance and impulse voltage resistance of wind turbine, variable frequency motor and traction motor windings, you can choose corona resistant flat enamelled wire. 

● Product Features

Toly electric specialize in the production of copper and aluminum flat enamelled wire series products, with an annual production capacity of 14,000 tons of flat wire, using a variety of enamelling process, combined with Toly’s years of accumulated quality control experience. It’s the ideal choice for the production of various high-end motor and electrical equipment windings. 
★Superior performance
★Full range
★ Extensive use

● Main Product Categories

NameFlat PVF/PVAFlat Polyester imideFlat Ester imide/polyamide imideFlat Polyamide imideFlat PolyimideFlat Corona resistant
Thermal class120180200220240200
PerformanceExcellent resistance to transformer oil, good scratch resistance, excellent flexibility and adhesion and good hydrolysis resistanHigh heat resistance, good chemical solvent resistance, strong hydrolysis resistanceExcellent heat resistance, strong chemical resistance, good scratch resistanceExcellent heat resistance, strong chemical resistance, good scratch resistanceExcellent electrical insulation performance, mechanical properties, especially high flexibility, high heat resistance, softening breakdowGood resistance to corona and impulse voltage

The above products can be produced according to the standard provided by users.

●Technical Data

Wire specification range:
Thickness 0.80~5.60 mm
Width 2.00~18.00 mm
Range of coating thickness: 0.08~0.20 mm
Range of breakdown voltage: 3000V~5000V